Kategórie
 
 
 
 
 

Void Bias Q3

Void Bias Q3

Kód produktu:BiasQ3Kód produktu:
The four-channel Bias Q3 DSP touring amplifier provides reliable premium-grade power with intuitive front panel control. The Q3 offers ample power, allowing for high SPL even with 8 or 16 Ω loads, and is capable of delivering 4 x 2000 W output on 4 Ω loads, increasing to 2300 W when driven asymmetrically. This amplifier has been designed with versatility and ease of use in mind
Dodacia lehota
Dodacia lehota: Na objednávku
Odporúčaná cena
Na splátky cez
Zistiť cenu
Ab676161000051746d1cb6b23357635c9654ec00
Odborné poradenstvo Potrebujete poradiť ? Zavolajte nám :)
+421 908 888 555(Po - Pia 8:00 - 17:00)

Key features

  • Innovative power supply design

  • Flexible routing and mixing

  • 4.3” touch screen display and rotary encoder for

    intuitive control

  • Four input channels with physical analogue and

    digital AES3 link in/out connectors for maximum

    flexibility

  • Analogue to Dante conversion and forwarding for

    ease of signal distribution

  • Customisable input backup policy to automatically

    switch input source in case of signal failure for

    improved reliability

  • Complete user interface integrated into Armonia

    Pro Audio SuiteTM

  • Top-grade DSP with high dynamic range and

    extensive feature set

  • Multi-stage signal processing

  • Input and output IIR, FIR, IIR+FIR equalizers and

    raised-cosine filters

  • Complete sets of limiters (peak, RMS voltage, RMS

    current, and TruePowerTM)

  • Speaker cable loss compensation with Active

    DampingControlTM

  • Full protection circuitry: over/under AC voltage;

    troublesome signals (clipping, VHF, long-term RMS); DC; thermal; short circuit; and mute at power on/off

Applications

  • Small to medium-scale touring

  • Corporate and AV

  • Festivals & Events

  • Live music venues

  • Nightclubs & Bars

Channel Handling

Outputs

4 x Speakon NL4

Inputs

4 Dante/AES67 TX (from local input or DSP)

Analog

4x XLR female

4 x XLR male (LINK)

Digital AES3

4 (2x XLR)

4 x XLR male (LINK)

Digital Dante/AES67

2 XLR Ethercon (4 x audio channels)

 

Audio

 

Gain

Vrms

Input sensitivity @ 8 Ω

32 dB

2.86

S/N(20Hz-20kHz@8Ω)

109 Typ. dB(A)

Max input level

24 dBu

Frequency response @ 8 Ω load

20Hz-20kHz+/-1.0dB

Crosstalk (1 kHz)

-75 dB typ.

CMRR

65 dB typ

THD+N (from 0.1 W to Half Power)

<0.1% (typical < 0.05%)

SMPTE IMD (from 0.1 W to Half Power)

<0.1% (typical < 0.05%)

Output impedance at 100 Hz

30 mΩ

DSP

AD converters

24 Bit TandemTM @ 48 kHz
125 dB-A Dynamic Range - 0.005 % THD+N

DA converters

24 Bit TandemTM @ 48 kHz
117 dB Dynamic Range - 0.003 % THD+N

Sample rate converter

24 Bit @ 96 kHz
140 dB Dynamic Range - 0.0001 % THD+N

Internal precision

32 bit floating point

Latency

2.5 ms fixed latency architecture

Memory/Presets

50 amplifier snapshots, virtually unlimited speaker presets

Delay

2 s (input) + 100 ms (output) for time alignment

Equalizer

Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass

Crossover

Linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)

Limiters

TruePowerTM, RMS voltage, RMS current, Peak limiter

Damping control

Active DampingControlTM and LiveImpedanceTM measurement

Display Specifications

Resolution

480x272, 4.3” diagonal

Brightness

600 nit

Control

Multitouch capacitive. Rotary encoder 20 steps/turn with pushbutton

Output Stage

 

per channel @ 8 Ω (symmetrical)*

1400 W

per channel @ 4 Ω (symmetrical)*

2000 W

per channel @ 2 Ω (symmetrical)*

2000 W

per channel @ 8 Ω (asymmetrical)**

1500 W

per channel @ 4 Ω (asymmetrical)**

2300 W

per channel @ 2 Ω (asymmetrical)**

2000 W

@ 8 Ω bridged

4000 W

@ 4 Ω bridged

4000 W

Maximum unclipped output voltage

155 Vpeak

Maximum output current

>55 Apeak

   
       
     
     
   
   
       
     
     
   
   

Power supply

Universal regulated switch mode with PFC, SRM

Nominal voltage (±10%)

100-240 VAC @ 50-60 Hz

Operating voltage

90-264 VAC @ 50/60 Hz

AC mains connector

IEC C20 inlet (20 A max)

 

Networking

Connectivity

Two Gigabit Ethernet ports, integrated switch, Ethercon connectors

Supported topologies

Star, Daisy Chain

Remote interface

ArmoníaPlus or other preferred software

 

Construction

Dimensions

483 x 381 x 88.9 mm (19 x 15 x 3.5 in)

Weight

11.5 Kg (25.4 lbs)

5565

 

 

 

Ab676161000051746d1cb6b23357635c9654ec00
Odborné poradenstvo Potrebujete poradiť ? Zavolajte nám :)
+421 908 888 555(Po - Pia 8:00 - 17:00)
 
 
Naposledy prezerané
The four-channel Bias Q3 DSP touring amplifier provides reliable premium-grade power with intuitive front panel control. The Q3 offers ample power, allowing for high SPL even with 8 or 16 Ω loads, and is capable of delivering 4 x 2000 W output on 4 Ω loads, increasing to 2300 W when driven asymmetrically. This amplifier has been designed with versatility and ease of use in mind

Void Bias Q3

Dodacia lehota
Dodacia lehota: Na objednávku
 
 
Double banner 1

Servis

Našim klientom poskytujeme komplexnú starostlivosť, ktorá zahŕňa profesionálny záručný aj pozáručný servis. V prípade akýchkoľvek komplikácií počas trvania záruky sa postaráme o rýchle a bezproblémové vyriešenie problému. Našu podporu však nestrácate ani po jej uplynutí, pretože naďalej ponúkame odborné opravy a pravidelnú údržbu vašich zariadení. Naším cieľom je garantovať dlhodobú a spoľahlivú funkčnosť vašej techniky za každých okolností.

Double banner 2

Prenájom

Okrem inštalácií a servisu ponúkame aj komplexný prenájom profesionálnej svetelnej, zvukovej a DJ-skej techniky pre podujatia akéhokoľvek rozsahu.